Toyota 4Runner: Rear Differential Carrier Oil Seal

Installation

INSTALLATION PROCEDURE 1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY (a) Install a new gasket and the differential carrier assembly with the 10 nuts and 10 washers. Torque: 52 N·m {530 kgf·c ...

Components

COMPONENTS ILLUSTRATION ...

Other materials about Toyota 4Runner:

Transmission Fluid Temperature Sensor "B" Circuit Low Input (P2742,P2743)
DESCRIPTION The Automatic Transmission Fluid (ATF) temperature sensor is on the transmission, just in front of the oil cooler inlet pipeline. If the ECM detects an abnormally high ATF temperature near this sensor, it illuminates the warning light. HI ...

Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT AXLE HUB SUB-ASSEMBLY LH (a) Apply MP grease to a new O-ring. (b) Inst ...