Toyota 4Runner: Axle And Differential
Toyota 4Runner Service Manual / Drivetrain / Axle And Differential
- Automatic Disconnecting Differential Actuator
- Axle System
- Differential Oil
- Differential System
- Front Axle Hub Bolt
- Front Axle Hub(for 2wd)
- Front Axle Hub(for 4wd)
- Front Differential Carrier Assembly(for 4wd)
- Front Differential Carrier Oil Seal(for 4wd)
- Front Differential Side Gear Shaft Oil Seal(for 4wd)
- Rear Axle Hub Bolt
- Rear Axle Shaft
- Rear Differential Carrier Assembly(w/ Differential Lock)
- Rear Differential Carrier Assembly(w/o Differential Lock)
- Rear Differential Carrier Oil Seal
- Rear Differential Lock Control Switch
- Rear Differential Lock Position Switch
- Steering Knuckle(for 2wd)
- Steering Knuckle(for 4wd)
Reassembly
REASSEMBLY
PROCEDURE
1. INSTALL SHIFT SOLENOID VALVE S2
(a) Coat a new O-ring with ATF and install it to the solenoid valve.
Text in Illustration
*1
...
Automatic Disconnecting Differential Actuator
Components
COMPONENTS
ILLUSTRATION
Installation
INSTALLATION
PROCEDURE
1. INSTALL AUTOMATIC DISCONNECTING DIFFERENTIAL ACTUATOR
(a) Remove any old FIPG material.
NOTICE:
Be careful not ...
Other materials about Toyota 4Runner:
Inspection
INSPECTION
PROCEDURE
1. INSPECT MAGNET CLUTCH ASSEMBLY
(a) Check the magnet clutch operation.
(1) Confirm that the magnet clutch hub and magnet clutch rotor lock when the
positive (+) lead of the battery is connected to terminal 3 of the magnet clutch, ...
Terminals Of Ecu
TERMINALS OF ECU
1. CHECK COMBINATION METER ASSEMBLY
(a) Disconnect the F14 combination meter assembly connector.
(b) Measure the resistance and voltage according to the value(s) in the table
below.
Terminal No. (Symbol)
Wiring Co ...
© 2016-2026 | www.to4runner.net
0.0072
0.0072