The wireless remote control can be used to lock and unlock the vehicle.
Vehicles without a smart key system
1. Locks all the doors 2. Sounds the alarm (press and hold) 3. Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
4. Opens the windows and moon roof (press and hold)* *: This setting must be customized at your Toyota dealer.
Vehicles with a smart key system
1. Locks all the doors
2. Unlocks all the doors
Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
3. Opens the windows and moon roof (press and hold)*
4. Sounds the alarm (press and hold)
*: This setting must be customized at your Toyota dealer.
Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice)
Door lock buzzer
If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously. Fully close the door to stop the buzzer, and lock the vehicle once more.
Panic mode
Vehicles without a smart key system
When is pressed for longer than
about one second, an alarm will sound intermittently and the vehicle lights will
flash to deter any person from trying to break into or damage your vehicle.
To stop the alarm, press any button on the wireless remote control.
Vehicles with a smart key system
When is pressed for longer than
about one second, an alarm will sound intermittently and the vehicle lights will
flash to deter any person from trying to break into or damage your vehicle.
To stop the alarm, press any button on the electronic key.
Security feature
If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
Alarm
Using the wireless remote control to lock the doors will set the alarm system.
Conditions affecting operation
Vehicles without a smart key system
The wireless remote control function may not operate normally in the following situations:
• Near a TV tower, radio station, electric power plant, airport or other facility that generates strong radio waves
• When carrying a portable radio, cellular phone or other wireless communication devices
• When multiple wireless keys are in the vicinity
• When the wireless key is in contact with, or is covered by, a metallic object
• When a wireless key (that emits radio waves) is being used nearby
• When the wireless key has been left near an electrical appliance such as a personal computer
Vehicles with a smart key system
If the wireless remote control does not operate properly (vehicles with a smart key system)
Locking and unlocking the doors: Use the mechanical key.
Key battery depletion
Vehicles without a smart key system
If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary.
Vehicles with a smart key system
When the electronic key battery is fully depleted
When riding in an aircraft
When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag etc, ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.
Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control system) can be changed.
(Customizable features )
Certification for wireless remote control
For vehicles sold in the U.S.A.
FCC ID: HYQ14ACX
FCC ID: HYQ13CZD
FCC ID: HYQ14ADF
FCC ID: HYQ13CZE
FCC ID: HYQ12BBY
FCC ID: HYQ13BDC
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 ULTRASONIC SENSOR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection
Condition
Specified Condition
1 (E ...
Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
NOTICE:
As brake fluid may overflow, do not leave the brake fluid can in the
reservoir filler opening when adding brake fluid.
Do not allow brake fluid to come into contact with any painted surface.
If ...