Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY
(a) Using a center punch, mark the center of the tapered-head bolt.
(b) Using a 3 to 4 mm (0.118 to 0.157 in.) drill, drill a hole in the 2 bolts.
(c) Using a screw extractor, remo ...
Vehicle Speed Signal Malfunction (B2282,B2283)
DESCRIPTION
The power management control ECU and the combination meter are connected by a
cable and the CAN communication lines. This DTC is stored when the vehicle speed
signal information from the cable and the vehicle speed signal information from
th ...