Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE TRANSMISSION CONTROL SHAFT LEVER LH
(a) Remove the nut, spring washer and control shaft lever LH.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Using a screwdriver, bend the tabs of the lock washer.
(b) Remove th ...
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for both the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY LH
(a) Install new 9 clips to the fro ...